RIYE was founded in 1991,we manufacture and service the products of Transformer,Regulator,UPS(Uninterruptible Power System),etc.Riye Electric persists the goal of ''safety'',''maneuverability'',''endurance''. Our products conform to international quality standards and international industrial standards,and we believe that our design must focus on 3H:High quality&High endurance&High safety.That's why not only high technology equipment agent but also distributors,engineers,and those who are planning to set up the factory overseas always put our product at the first place to make sure the power system's quality. Power system is one of our main products,for the sake of giving you the best quality and best service,our professional teams endeavor day and night.Lighting you up always!

Our main power solution products:
  • AVR system
  • UPS system
  • Transformer
  • Frequency Converter
  • DC power supply
  • Other power equipment
We have passed the ISO9002 certificate , and we believe the certificate speak for themselves.

產品介紹

協定分析儀 BusFinder
  • Facebook
  • LINE
  • X
  • LinkedIn

Acute BF7264B MIPI D-PHY 分析儀 方案說明
Acute BF7264B MIPI D-PHY 分析儀 方案說明
Acute BF7264B MIPI D-PHY 分析儀 方案說明
Acute BF7264B MIPI D-PHY 分析儀 方案說明
Acute BF7264B MIPI D-PHY 分析儀 方案說明

產品名稱 : Acute BF7264B MIPI D-PHY 分析儀 方案說明

產品型號 : BF7264B MIPI D-PHY

產品說明

此方案僅於BF7264B產品 (正面有兩個USB孔)適用,除主機可繼續使用原BF6264B功能外,增加MIPI D-PHY分析儀功能。
瀏覽更多內容
Acute_BF7264B_DPHY_Solution-20190515版本-宥億企業yoie (2.4 MB)
Acute_protocol_analyzer_logic_analyzer_BF7264B_BF7264B+_2022.01-宥億企業yoie (1.7 MB)
BF7264B MIPI DSI HS Mode實測結果-宥億企業yoie (576 KB)
產品特性
Acute BF7264B MIPI D-PHY 方案說明

概況:
此方案僅於BF7264B產品 (正面有兩個USB孔)適用,除主機可繼續使用原BF6264B功能外,增加MIPI D-PHY分析儀功能。
MIPI D-PHY方案,規格內容如下:
--------------------------------------------------------------------------------
  1. BF7264B,32Gb RAM,搭配MIPI D-PHY探棒組
       
 
  1. 支援 D-PHY V1.2
Up to 2.5Gbps per lane,1 + 4 Lanes
      
 
  1. 可顯示 CSI-2 1.3 DSI 1.3 協定封包資料以表格方式呈現,包含DSI中的DCS 1.3指令解析
       
 
  1. 使用32Gb RAM搭配硬碟串流來儲存D-PHY通訊資料,可完整節錄待測物從Low Power Mode初始化到High Speed Mode的流程
          可擷取資料量 (以未啟用硬碟串流來估算)  
      
  1. 提供Data Filter功能,可將不必要的影像資料濾除以節省記憶體
  2. 提供Search資料功能
  3. 提供 ECC/CRC Packet 計算及錯誤顯示
  4. 可顯示影像資料,包含 24bit Pixel格式以及,壓縮的DSC 類型之封包
  5. D-PHY 命令統計功能,包含封包總數、各別指令數量、以長度分類的指令統計以及錯誤數量統計
        
  1. D-PHY 命令觸發功能
        a. 觸發參數包含命令與參數資料可輸入 32 bytes 的資料做為觸發條件.
             可涵蓋所有 Short PacketShort Packet, 以及大部分非影像資料的 Long Packet
                               Short Packet 長度 4bytes Header
                               Long Packet 長度 4bytes Header + 28byte Data
        b.可觸發 CRC/ECC Error
        c.可透過Trigger-Out接孔同步觸發外部的示波器 

FAQ

  1. 支援MIPI DSI第幾版的規格,是否有Differential對數或port數限制呢?
  A:支援到D-PHY V1.2,最高2.5Gbps per lane,1 + 4 Lanes。

  2. 是否有支援C-PHY解碼呢?
  A:不支援C-PHY解碼,亦無開發計劃。

  3. 是否支援DSI-2?
  A:因為DSI-2 必須同時包含C/D-PHY才可以,所以不支援的。

  4. 量測時是否會影響訊號品質?
  A:外接的儀器量測必然會有部分的負載效應影響,我們這邊採用End-tip搭配SMPM Coaxial Cable的連接方式來降低對待測物
        干擾並提升訊號品質。

  5. 是否有支援訊號發送 (Tx) 功能?
  A:不支援訊號發送功能

  6. 探棒與待測物如何連接?
  A:(1)焊線:使用End-tip以跳線的方式連接待測物,此時跳線長度必須少於5mm 以提升訊號品質。
      * End-tip上面的電阻為1kΩ/0402,若焊線時不慎損毀,可自行替換。
                      
        
       (2)焊2.0mm PH:方便使用,但stub效應會降低一些訊號品質。
       使用者亦可將1kΩ焊在待測訊號端,再接上pin socket,而end-tip則焊上pin header
       並將原本tip上的1kΩ short,這樣可降低stub效應。
              附註: 建議以熱熔膠固定加強與 end-tip 的接合力.

       
 
       (3)user-tip:客戶自行依待測物形態設計專屬的End-tip,只需用1kΩ連接待測訊號
       再以50Ω特性阻抗的PCB trace接往SMPM plug即可,之後便可用user-tip取代End-tip,
       將SMPM-SMPM cable接到user-tip便可。

  7. 待測物如何接地?
      由於設備與待測系統仍需共地,因此可先將Way Station上的GND Port連接至待測物的
      GND即可,兩個Way Station都要接。
      除非波形太差/干擾太大,分析之後發生較多的錯誤時,則可改為每個End-tip都接地的效果最好。

  8. BF6000BF7000的設備差異:
  1. :BF6000正面USB孔僅一個。
      
          BF7000正面USB孔有二個,並增加MIPI D-PHY選件功能。
      

BusFinder系列產品
      

規格說明
BF7264B MIPI DSI HS Mode實測結果-宥億企業
Loading...
Loading...