Description

RT-ZC31 current probe supports switching between three sensitivity ranges with the following parameters:

The RT-ZC31 comes with a BNC interface and it requires a power supply (RT-ZA13) for operation. It is not planned to build this probe with the proprietary R&S probe interface. The RT-ZC31 is supported on RTE1000, RTO2000 and RTP from firmware 4.75 or higher as “Predefined Probe”. On other R&S oscilloscopes, the probe sensitivity has to be set manually.

若是有不清楚的地方
歡迎來電洽詢02-7746-3368